NAMELISTS changed in Surfex v7_3
- NAM_IO_OFFLINE:
- XIO_FRAC: factor to calibrate the number of points affected to the processor NPIO in case of MPI parallelization
- YALG_MPI: to decide the mean of distribution of points among processors in case of MPI parallelization (LIN, ADJ, TILL, TILA)
- NAM_FLAKEn:
- CFLK_FLUX: FLK=>FLAKE, new option ECUME
- XICHCE, LPRECIP, LPWEBB: to use ECUME parameterization (sea NAM_SEAFLUXn to compare)
- NAM_ISBAn:
- CALBEDO: CM13 to activate new albedo description
- NAM_CH_ISBAn:
- LCH_NO_FLUX: for NO fluxes
- NAM_SGH_ISBAn:
- CRUNOFF: TOPD to activate topmodel runoff
- CKSAT: EXP to activate exponential decay
- CSOM=>CSOC
- NAM_DIAG_ISBAn:
- LWOOD_SPIN, LSOILCARB_SPIN: suppressed
- LSURF_MISC_DIF: to write diagnostic for ISBA-DIF
- LWATER_BUDGET: to calculate the water budget
- NAM_PREP_ISBA:
- CTYPE_HUG, CTYPE_TG : can now be NETCDF
- NAM_PREP_SEAFLUX:
- XTIME_REL, LCUR_REL, LTS_REL: to relax currents and temperature
- LZERO_FLUX, XCORFLX, LCORR_FLUX, LDIAPYC: other new options for 1D ocean model
- NAM_DIAG_TEBn:
- LUTCI: to write utci diagnostics
- NAM_TEBn:
- CCH_BEM: BEM option for roof/wall outise convective coefficient (DOE-2 or empty)
- NAM_PREP_TEB:
- XHUI_BLD: building humidity
- CROAD_DIR: road direction (UNIF, ORIE)
- CWALL_OPT: walls (UNIF, TWO)
- NAM_DATA_TEB:
- NROOF_LAYER=>NPAR_ROOF_LAYER
- NROAD_LAYER=>NPAR_ROAD_LAYER
- NWALL_LAYER=>NPAR_WALL_LAYER
- XUNIF_URBTYPE, CFNAM_URBTYPE, CFTYP_URBTYPE: suppressed
- CBLD_ATYPE: type of averaging for walls (ARI, MAJ)
- NUNIF_BLDTYPE, CFNAM_BLDTYPE, CFTYP_BLDTYPE: type of buildings
- NUNIF_BLD_AGE, CFNAM_BLD_AGE, CFTYP_BLDAGE: date of construction of buildings
- CCSVDATAFILE: name of file for the description of buildings
- NUNIF_USETYPE, CFNAM_USETYPE, CFTYP_USETYPE: type of use in the buildings
- XUNIF_ROAD_DIR, CFNAM_ROAD_DIR, CFTYP_ROAD_DIR: TEB options for road direction (UNIF,ORIE)
- XUNIF_VEG_ROOF, CFNAM_VEG_ROOF, CFTYP_VEG_ROOF: suppressed
- XUNIF_ROUGH_ROOF, CFNAM_ROUGH_ROOF, CFTYP_ROUGH_ROOF: roof roughness coeff
- XUNIF_ROUGH_WALL, CFNAM_ROUGH_WALL, CFTYP_ROUGH_WALL: wall roughness coeff
- NAM_SPINUP_CARBn: new namelist
- contains LSPINUPCARBS, LSPINUPCARBW, XSPINMAXS, XSPINMAXW, NNBYEARSPINS, NNBYEARSPINW
- NAM_CROCUSn: new namelist
- contains LSNOWDRIFT, LSNOWDRIFT_SUBLIM, XZ0ICEZ0SNOW, XRHOTHRESHOLD_ICE, XALBICE1, XALBICE2, XALBICE3, XVAGING_NOGLACIER, XVAGING_GLACIER
- NAM_TEB: new namelist
- NTEB_PATCH: number of TEB patchs
- CBEM: DEF or BEM (Building Energy Model)
- CCOOL_COIL: type of cooling coil (IDEAL/DXCOIL)
- CHEAT_COIL: type of heating coil (IDEAL/FINCAP)
- LAUTOSIZE: to activate autosize calculations
- NROAD_LAYER: number of layers in roads
- NFLOOR_LAYER: number of layers in floors
- NROOF_LAYER: number of layers in roads
- NWALL_LAYER: number of layers in walls
- LGREENROOF: to activate greenroofs description
- LHYDRO: not implemented for the moment
- NAM_DATA_BEM: new namelist
- NPAR_FLOOR_LAYER: number of layers in roofs
- XUNIF_HC_FLOOR, CFNAM_HC_FLOOR, CFTYP_HC_FLOOR: heat capacity of floor layers
- XUNIF_TC_FLOOR, CFNAM_TC_FLOOR, CFTYP_TC_FLOOR: thermal conductivity of floor layers
- XUNIF_D_FLOOR, CFNAM_D_FLOOR, CFTYP_D_FLOOR: thickness of floor layers
- XUNIF_FLOOR_HEIGHT, CFNAM_FLOOR_HEIGHT, CFTYP_FLOOR_HEIGHT: building floor height
- XUNIF_TCOOL_TARGET, CFNAM_TCOOL_TARGET, CFTYP_TCOOL_TARGET: cooling setpoint of indoor air
- XUNIF_THEAT_TARGET, CFNAM_THEAT_TARGET, CFTYP_THEAT_TARGET: heating setpoint of indoor air
- XUNIF_F_WASTE_CAN, CFNAM_F_WASTE_CAN, CFTYP_F_WASTE_CAN: fraction of waste heat into the canyon
- XUNIF_EFF_HEAT, CFNAM_EFF_HEAT, CFTYP_EFF_HEAT: efficiency of the heating system
- XUNIF_F_WATER_COND, CFNAM_F_WATER_COND, CFTYP_F_WATER_COND: fraction of evaporation for condensers
- XUNIF_HR_TARGET, CFNAM_HR_TARGET, CFTYP_HR_TARGET: relative humidity setpoint
- XUNIF_QIN, CFNAM_QIN, CFTYP_QIN: internal heat gains
- XUNIF_QIN_FRAD, CFNAM_QIN_FRAD, CFTYP_QIN_FRAD: radiant fraction of internal heat gains
- XUNIF_QIN_FLAT, CFNAM_QIN_FLAT, CFTYP_QIN_FLAT: latent fraction of internal heat gains
- XUNIF_SHGC, CFNAM_SHGC, CFTYP_SHGC: solar transmitance of windows
- XUNIF_U_WIN, CFNAM_U_WIN, CFTYP_U_WIN: glazing thermal resistance
- XUNIF_GR, CFNAM_GR, CFTYP_GR: glazing ratio
- XUNIF_SHGC_SH, CFNAM_SHGC_SH, CFTYP_SHGC_SH: solar transmitance of windows + shading
- XUNIF_INF, CFNAM_INF, CFTYP_INF: infiltration/ventilation flow rate
- XUNIF_V_VENT, CFNAM_V_VENT, CFTYP_V_VENT: ventilation flow rate
- XUNIF_CAP_SYS_HEAT, CFNAM_CAP_SYS_HEAT, CFTYP_CAP_SYS_HEAT: capacity of the heating system
- XUNIF_CAP_SYS_RAT, CFNAM_CAP_SYS_RAT, CFTYP_CAP_SYS_RAT: rated capacity of the cooling system
- XUNIF_T_ADP, CFNAM_T_ADP, CFTYP_T_ADP: Apparatus dewpoint temperature of the cooling coil
- XUNIF_M_SYS_RAT, CFNAM_M_SYS_RAT, CFTYP_M_SYS_RAT: rated HVAC mass flow rate
- XUNIF_COP_RAT, CFNAM_COP_RAT, CFTYP_COP_RAT: rated COP of the cooling system
- XUNIF_T_SIZE_MAX, CFNAM_T_SIZE_MAX, CFTYP_T_SIZE_MAX:
- XUNIF_T_SIZE_MIN, CFNAM_T_SIZE_MIN, CFTYP_T_SIZE_MIN:
- XUNIF_SHADE, CFNAM_SHADE, CFTYP_SHADE: flag to activate shading devices
- XUNIF_NATVENT, CFNAM_NATVENT, CFTYP_NATVENT: flag to describe bld surventilation solution 0 (NONE), 1 (MANU), 2 (AUTO)
- NAM_DATA_TEB_GREENROOF: new namelist
- NTIME_GR: number of time data for LAI
- NLAYER_GR: number of layers
- XUNIF_OM_GR, CFNAM_OM_GR, CFTYP_OM_GR: organic matter
- XUNIF_CLAY_GR, CFNAM_CLAY_GR, CFTYP_CLAY_GR: clay
- XUNIF_SAND_GR, CFNAM_SAND_GR, CFTYP_SAND_GR: sand
- XUNIF_LAI_GR, CFNAM_LAI_GR, CFTYP_LAI_GR: LAI
- NAM_PGD_TOPD: new namelist
- CCAT: base name for topographic files
- LCOUPL_TOPD: flog to activate coupling with TOPMODEL for ISBA
- XF_PARAM_BV: for exponential decay
- XC_DEPTH_RATIO_BV: for exponential decay
- NAM_TOPD: new namelist
- LBUDGET_TOPD: to compute budget
- LSTOCK_TOPD: to stock drainage and runoff values
- NNB_TOPD: ratio between time steps of topmodel and isba
- NFREQ_MAPS_WG: frequency of output WG maps
- NFREQ_MAPS_ASAT: frequency of output ASAT maps
- NNB_STP_STOCK: number of time steps to write for the next simulation
- NNB_STP_RESTART: number of time steps to restart from a previous simulation
- XSPEEDR: river speed
- XSPEEDG: ground speed
- XQINIT: initial discharge at the outlet of the catchments
- XRTOP_D2: depth used by topodyn for lateral transfers (expressed in ratio of isba D2)
- NAM_CH_EMISSIONS: new namelist
- CCH_EMIS: NONE, AGGR or SNAP: type of cadastres for chemical emissions
- NAM_CH_SNAP_EMIS_PGD: new namelist
- NEMIS_NBR: number of chemical pgd fields chosen by user
- NEMIS_SNAP: number of snaps
- CEMIS_NAME: name of the chemical fields
- CEMIS_COMMENT: comments on the chemical fields
- CSNAP_MONTHLY_FILE: monthly snap coefficients
- CSNAP_DAILY_FILE: daily snap coefficients
- CSNAP_HOURLY_FILE: hourly snap coefficients
- CSNAP_POTENTIAL_FILE, CSNAP_POTENTIAL_FILETYPE, XUNIF_SNAP: for the snap potential data
- XUNIF_DELTA_LEGAL_TIME, CDELTA_LEGAL_TIME_FILE, CDELTA_LEGAL_FILETYPE: for the difference (in hours) between legal time and UTC time
RSS 2.0
